低温大试样热胀系数测试

本介绍了用熔融石英引伸法测量硬质材料热胀系数的简便装置,并给出了试样在液氦温区到室温的测量结果,数据的一致性以及与已有献数据比较取得了不错的结果．     

45kVA/2.4kV单相高温超导变压器的设计和试验

为了研究630kVA/10.5kV三相高温超导变压器突发短路情况下热稳定性以及机械稳定性的问题,开发了45kVA(2400V/160V,18.75A/281.25A)单相高温超导变压器.铁心为单相三柱式铁心;杜瓦为带有室温孔的玻璃钢杜瓦,可以保证铁心处在室温下并与绕组隔绝;导线采用Ag合金包套不锈钢加强Bi2223多芯高温超导带材,高压绕组为多层圆筒式绕组,各层间分别置有层间绝缘和冷却通道,低压绕组采用饼式结构;为减小引线的漏热,低压引线采用优化的气冷引线.采用有限单元法(FEM)分析了该变压器电磁、机械问题,并对其进行了基本的性能试验以及突发短路试验,得到重要意义的结果.     

激光熔覆硬质合金强化化纤切断刀的研究

在机械压制法预置硬质合金WC/Co粉末的条形55Si2Mn弹簧钢上,用激光熔覆方法制备了化纤切断刀.调整熔覆层粉末配方中Al、TiC的加入量,结果表明加适量的Al粉能有效地抑制气孔,加TiC粉末能提高熔覆硬度.通过优化激光熔覆工艺参数,得到了无气孔缺陷、组织性能良好、硬度达到HV0.21250的激光熔覆层,达到了化纤切断刀的性能要求.     

控轧控冷技术应用在Bi-2223/Ag超导带材制备过程中的研究

控轧控冷技术在钢铁中厚板材的应用已趋成熟,采用控轧控冷技术制备的中厚板材具有组织均匀、晶粒细小、机械性能高等优点.Bi-2223/Ag超导带材制备过程需经过多次反复的热处理和中间轧制过程,本文结合控轧控冷工艺特点,通过控制带材中间轧制制度和控制热处理冷却速度,研究了压下量和冷却条件对Bi-2223相变和其微观结构的影响,并借助SEM、XRD等方法对带材样品进行了观察,实验结果表明:合理的控轧控冷条件能够改善Bi-2223/Ag的微观结构并能够有效提高其电性能.这为控轧控冷技术在Bi-2223/Ag超导带材制备中的应用提供了初步理论依据,同时为形变热处理工艺提供了新的优化方向.     

Effect of substituent distribution on water solubility of O-methylcellulose

The effect of substituent distribution on the water solubility of O-methylcellulose (MC) was re-examined to elucidate the lower limit of the degree of substitution (DS) in water-soluble MC. To this end, a series of 2,3-MCs which are regioselectively substituted at the C-2 and C-3 hydroxyl groups were prepared by homogeneous methylation. It was found that the lower limit for the DS value of water-soluble 2,3-MC was almost the same as that for MCs having even distributions of substituents along the cellulose chain as well as in the anhydroglucose units. This revised version was published online in August 2006 with corrections to the Cover Date.     

组合同伦方法在无界域上的收敛性

组合同伦内点法由Feng等提出，是求解有界区域上的非凸数学规划的一种大范围收敛性方法，本文证明此算法适用于某些无界区域上的非凸数学规划问题。     

H-值半鞅测度的弱收敛

本文引进了H-值半鞅测度，研究了其基本性质和与之相联系的随机积分，本文还引入了H-值半鞅测度序列依分布弱收敛的概念，建立了H-值半鞅测度的极限定理，给出了H-值半鞅测度弱收敛的条件。     

氧分子的价壳层光学振子强度研究

在入射电子能量为1500eV、平均散射角为0°、能量分辨为60meV条件下，得到了氧分子在5.7—28.5eV能量区间的光学振子强度密度谱，获得了氧分子E³Σ^-_ｕ的ν′=0，1，2和2³Π_ｕ的ν′=0，1各振动能级的绝对光学振子强度，同时检验了我们的Bethe-Born转换因子外推到低能端的可靠性．将所得结果与前人的工作进行了比     

铟参与的4-溴-1，1，1-三氟-2-丁烯与α-烷氧基醛亚胺的烯丙化反应：4，4，4-三氟-γ-羟基缬氨酸的合成

铟参与的4-溴-1,1,1-三氟-2-丁烯与α-烷氧基醛亚胺的烯丙化反应以中等的产率和高非对映选择性生成了高烯丙基胺3.从甘油醛亚胺和4-溴-1,1,1-三氟-2-丁烯反应制备的高烯丙基胺3g出发,以7步反应24%的总产率合成了4,4,4-三氟-γ-羟基缬氨酸11.     

PREPARATION OF POLYMER MICROSPHERES WITH PYRIDYL GROUP AND THEIR STABILIZED GOLD METALLIC COLLOIDS

Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine)(poly(EGDMA-co-4-VPy))microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate(EGDMA)and 4-vinylpyridine (4-VPy)with 2,2'-azobisisobutyronitrile(AIBN)as initiator in neat acetonitrile.The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm,which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles.The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.